Turbo Heat Shield GEN 3 Onyx - Single T3

The best Turbo heat protection blanket on the market

New GEN 3 DEI - the strongest, most heat resistant shield available for T3 turbine housing and similar

DEI raised the bar! The most technologically advanced turbo shield ever!

DEI incorporated all their experience to build the absolute best turbo shield on the market. By developing advanced textiles and diving deep into what is needed to control turbo heat, DEI developed the GEN-3 Onyx Turbo Shield. A Silicone coated Onyx outer layer with multiple stainless steel and silica inner layers. Without a doubt the strongest, most heat resistant shield available.

OUTER SHELL

• Coated in silicone to insulate and hold up under extreme conditions
• Prevents fraying & encases seams to make them over 4 times stronger

INSULATION LAYER

• Thick layer of silica insulation keep heat in turbo shield and turbo housing
• Silica has a low thermal conductivity making one of the best insulators

INNER LAYER

• Stainless steel, glass fiber & silicone adds to insulating and thermal properties
• Increases seam strength, durability and insulation value

INNER COVER

• Stainless Steel fabric holds up against the highest temps
• Will not break down or become brittle with heat

Direct Heat Resistance: 1800°F

Radiant Heat Resistance: 1400°C / 2500°F

Size: T3

Color: Onyx

Kit: with shield and wire only

TURBO APPLICATION GUIDE Measuring your turbo size

• DEI Turbo shield sizes are based on two basic measurements. The first measurement is the circumference of the turbo not including the flange. The second measurement is the width of the turbo at it’s widest point not including the flanges. After measuring, refer to the chart to find the correct shield.

Fits, among others, the following exhaust housings:

- Garrett GT3071R, GT3076R, GT3082R, T3 (ext. WG), T3/T4 (ext. WG), T03/T04 (ext. WG), GT3582R

- BorgWarner S300 up to 14cm2 turbine housing

- Precision, Tial, Turbonetics all with T3 and VBand outlet

- Dodge 5,9L Cummins 94-02 and 03-27 Series turbochargers

- Chevy / GMC LB7 6,6L Duramax 01-04 Series turbocharger.

Warning!

Here you buy the coat individually. We also offer a complete set with fixing material and heat protection tape.

Price for heat protection blanket as shown, without turbine housing.

Only buy original titanium heat protection products!

With us you get the original titanium heat protection products from the USA. If you observe the market a little, you will notice that there are many similar products, which are offered as titanium heat protection and look exactly like that. This often much cheaper material comes from China, is much harder and therefore more brittle. It is not comparable to ours. The heat rejection and life are much worse. Do not save money at the wrong end. Take the original!