Snabba leveranser / Hög kvalitet / Snabb kundtjänst

Bosch injector 1462cc, 65mm (EV14L)

  • 1 381 kr
I lager.
Dela
Artikelnummer: 130-01-150

Bosch 1462cc / 1500cc injector, high impedance - adapted to 65mm (EV14L) to fit the Nuke Performance range of fuel rails.

This injector is equipped with the needed accessories according to a Bosch EV14L injector (60,65mm between O-rings / 65mm center to center of the O-rings).

 High impedance 1462cc injector from Bosch Motorsport
 Commonly referred to as Bosch 1500cc injector
 Corresponding to a Bosch EV14 L injector length
 Filtered top adapter for additional protection

When ordering injectors, always check the specifications of your fuel rail to accommodate the accurate injector type. Most Nuke Performance fuel rails use EV14L-sized injectors, available between 630cc to 2200cc.

 

Bosch Motorsport 1462cc Injector specifications :

 Bosch part number0280158333 / Bosch -333
 OEM part number0 280 158 040
 Type - w/o included adapters39mm EV14K (Compact)
 Type - with included adapters65mm EV14L (Long)
 ConnectorBosch JPT EV1 Minitimer Jetronic
 O-ring top / bottom14mm Viton / 14mm Viton
 Resistance8.5 ohm
 Volume at 3 BAR1462cc/min = 1000g/min = 132lb/hr @ 3bar
 Fuel compatibilityPetrol / Gasoline / E85 / M100 *
 Nozzle / Spray patternRegular tip / Single cone spray
 For motorsports useYES
 Part # / EAN130-01-150 / 7340209508291

* Note: If using the injector with methanol, flush it with regular fuel after use. Do not leave methanol in the injector for extended periods.

 Bosch 1462cc Injector capacity :
Test conditions can differ from real-world use due to equipment and technical factors. However, this info helps understand injector performance and when choosing other fuel system components.


 Measured peak static flow in a test environment
 2 BAR (29 PSI)N/A
 3 BAR (43.5 PSI)1450cc / min = 138.1 lb / h
 4 BAR (58 PSI)1690cc / min = 160.9 lb / h
 5 BAR (78.5 PSI)1900cc / min = 180.9 lb / h
 6 BAR (88 PSI)N/A
 7 BAR (101.5 PSI)N/A
  
 Petrol (10% margin)Turbo chargedNaturally aspirated
 1 cyl1x197 = 197hp1x257 = 257hp
 4 cyl4x197 = 788hp4x257 = 1028hp
 5 cyl5x197 = 985hp5x257 = 1285hp
 6 cyl6x197 = 1182hp6x257 = 1542hp
 8 cyl8x197 = 1576hp8x257 = 2056hp
   
 E85 (10% margin)Turbo chargedNaturally aspirated
 1 cyl1x171 = 171hp1x214 = 214hp
 4 cyl4x171 = 684hp4x214 = 856hp
 5 cyl5x171 = 855hp5x214 = 1070hp
 6 cyl6x171 = 1026hp6x214 = 1284hp
 8 cyl8x171 = 1368hp8x214 = 1712hp


Injector calculation : The figures listed above are based on a base pressure of 3 BAR (43.5 PSI) at idle, providing a quick overview of this injector's performance.

 

 Bosch injector 1462cc, 65mm (EV14L) includes:
1 x Bosch Motorsport injector (# 0280158333)
1 x Injector adapter 14mm short - with filter (# 135-01-101)
1 x Injector adapter 14mm short - without filter (# 135-01-102)
1 x Bosch injector clip (# 135-01-005)

 


 Optional flow-matching for optimized performance and consistent fuel delivery for high-performance applications.
We offer all of our injectors as flow-matched in kits of 4, 5, 6, and 8 pcs. Flow-matched injectors ensure consistent fuel delivery, optimizing performance, efficiency, and smoothness. Out-of-the-box injectors may vary in flow, leading to uneven fuel distribution and reduced performance. We recommend flow-matched injectors for all high-performance or tuned engines, where precise fuel delivery is critical.
Bosch injector 1462cc, 65mm (EV14L), 4pcs flow matched Part # : 130-04-150
Bosch injector 1462cc, 65mm (EV14L), 5pcs flow matched Part # : 130-05-150
Bosch injector 1462cc, 65mm (EV14L), 6pcs flow matched Part # : 130-06-150
Bosch injector 1462cc, 65mm (EV14L), 8pcs flow matched Part # : 130-08-150

Injectors - Everything you need to know (FAQ)


Bosch Motorsport : Bosch Motorsport injectors provide high precision, reliability, and durability, engineered for optimal performance in demanding applications. Known for consistent fuel delivery, they are ideal for racing and performance tuning, especially when paired with Nuke Performance's range of fuel system components.